ACCTON TECHNOLOGY CORPORATION

MULTI-FUNCTION ETHERNET+MODEM/FAX (EN2218-2)

Card Type                    Modem (synchronous/asynchronous), Ethernet
Chipset                      Unidentified
Maximum Onboard Memory       32KB DRAM/128KB Flash RAM
Network Transfer Rate        10Mbps
Maximum Data Rate            14.4Kbps
Maximum Fax Rate             14.4Kbps
Data Bus                     PCMCIA Type II
Fax Class                    Class I
Data Modulation              Bell 103A/212A

                             ITU-T V.21, V.22, V.23, V.22bis, V.32,
                             V.32bis
Fax Modulation               ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression MNP5, MNP10, V.42, V.42bis
Topology                     Linear Bus/Star
Wire Type                    Unshielded twisted pair

                             RG-58A/U 50ohm coaxial
Boot ROM                     Not available

[Image]

                                CONNECTIONS

         Function            Label            Function             Label

  MAU connector               CN1      Unshielded twisted pair      CN3
                                       connector

  RG-58A/U 50ohm coaxial      CN2      Telephone line out           CN4
  connector

                        DIAGNOSTIC LED(S)

    LED       Color      Status             Condition

   LINK       Green        On       Network connection is good

   LINK       Green       Off      Network connection is broken

    OH        Green        On           Modem is off-hook

    OH        Green       Off            Modem is on-hook

                    SUPPORTED STANDARD COMMANDS

                         Basic AT Commands

  +++, ‘comma’, A/

  A, B, C, D, E, H, I, M, N, O, P, Q, T, V, W, X, Y, Z

  &C, &D, &F, &G, &K, &M, &P, &Q, &R, &S, &T, &V, &W, &X

                       Extended AT Commands

  \K, \N

  %C, %E, %L, %Q

                            S-Registers

  S0, S6, S7, S8

            Note: See MHI documentation for complete descriptions.

                         Proprietary AT Command Set

                              PROTOCOL/SPEED

  Type:             Configuration

  Format:           AT [cmds] Fn [cmds]

  Description:      Selects the protocol and speed the modem will attempt
                    to connect at.

     Command                              Function

        F0          Auto-detect the highest common connect speed.

        F1          Select V.21 or Bell 103 at 300bps speed.

        F3          Select V.23 at 75/1200bps speed.

        F4          Select V.22 or Bell 212A at 1200bps speed.

        F5          Select V.22bis at 2400bps speed.

        F6          Select V.32/V.32bis at 4800bps speed.

        F7          Select V.32bis at 7200bps speed.

        F8          Select V.32/V.32bis at 9600bps speed.

        F9          Select V.32bis at 12Kbps speed.

       F10          Select V.32bis at 14.4Kbps speed